Automatic nozzle 200-760L/min 5

Type : QLD6.0/12-IV

Weight： 2.5 kg

Material （body）: hard anodized aluminum

Material （handle）: Horseshoe (Injection Molded Nylon red Handle)

Material ( Nozzle Bumper ) : Rubber 

Swivel Inlet：2" ( 50mm ) recommended

Length：250mm

Valve Type： Slide Valve (Stainless)

Flow Rate : 200-760L/min (70-200GPM)

Flow Control Method : Automatic (constant pressure, variable flow, constant gallonage, flow does not change with pattern)

Working Pressure: 7 bar

Reach @ Flow: 50 m

Fog Pattern Method : Molded Rubber Teeth (fixed)

fog angle ：120°

Foam Trailer

TYPE：SX-FT

Carbon steel foam tank, the capacity of foam is 1000L

Towing hook height is adjustable

proportion mixing device with negative pressure type in-line (venturi tube), the mixingratio of 0.5% ~ 1% ~ 3% ~ 1% is adjustable

Equipped with low expansion foam gun 2 1 bottle, stainless steel medium expansion

foam gun, foam monitor 1 portable since the pendulum, and a stationary bubble gun

lifting jack

Slide device: 4pcs

Outer size： about length 4m X width 2.3m X height 1.8m

Gross weight（not include the foam）：about 2 tons

Equipped with liquid level display tube

Equipped with tool kit

Safety rails railing

Wear resistant mat

Reflective labeling

Wheeled Fire Robot

TYPE：SX-RW01 

1.Flow Rate:2000L-5000L/M  (Customized)   

2.speed: 18mph (29kph)

3.climbing angle: 45 degree

4.obstacle crossing height: 260mm

5.Working time: 8 hours for battery

6.Weight：90KG

7.Equipped cannon: 80L/S(1250GPM)

8  Package: Robot chassis& SS Monitor

Vertical Tank (fixed)

Type : PHYM32-160

Flow Rate of mixture：32L/S (500GPM) to 160L/S (2500GPM)

Working Pressure: 6-16 bar

Volume of the tank: 1500L to 15000L

Weight: From 1 ton to 5.6 tons

Mixture Ratio: 3％-6％ adjustable.

Material: The tank is made of carbon steel and the accessories are made of stainless steel

Parts: Tank, Foam Eductor, water inlet, water outlet, diaphragm, control valve etc.

Feature: It can combine with fire fighting pump, foam chamber, spray equipments as a foaming sytem.

Application: It is widely used for factory and mining enterprise, oil deport, chemical depart, dock, oil tanker, airport etc.

Horizontal Tank (fixed)

Type : PHYM32-160

Flow Rate of mixture：32L/S (500GPM) to 160L/S (2500GPM)

Working Pressure: 6-16 bar

Volume of the tank: 1500L to 15000L

Weight: From 1 ton to 5.6 tons

Mixture Ratio: 3％-6％ adjustable.

Material: The tank is made of carbon steel and the accessories are made of stainless steel

Parts: Tank, Foam Eductor, water inlet, water outlet, diaphragm, control valve etc.

Feature: It can combine with fire fighting pump, foam chamber, spray equipments as a foaming sytem.

Application: It is widely used for factory and mining enterprise, oil deport, chemical depart, dock, oil tanker, airport etc.

Portable Tank

Type : PY4-8

Flow Rate of mixture：4L/S (60GPM) OR 8L/S (125GPM)

Working Pressure: 6-11 bar

Volume of the tank: 100L, 200L, 300L, 500L,1000L

Time of spray: 100L>6MIN; 200L>12MIN; 300L>9MIN; 500L>15MIN; 1000L>20MIN

Range: >10M

Parts: Tank, foam nozzle, Foam Eductor, water band, cart, etc.

Feature: Is fast, convenient, fire extinguishing installation, non-aqueous liquid can be put out fires

Application: It is widely used for municipal district, residence district, factory and mining enterprise, oil deport, chemical depart, heat treatment depart, gas station, etc.

Foam Chamber B

Type : FCL16 (FOAM CHAMBER B)

Flow Rate：16L/S（250 GPM）

Working Pressure: 4-6 bar

Foam expansion ratio: 5:1（MIN）

25% Liquid precipitation time: 2.1 MIN

It is made of housing, foaming nozzle tube, guide board.

Principle: When the mixture go through the foaming nozzle tube, the fog flow will be developed. Then negative pressure occurs which will intake a lot of air to develop air foam. The foaming nozzle tube and guide board lead to oil tank, so the mixture flow down along the tank, covering on the fire area to extinguish a fire.

Foam Chamber A

Type : FC8 (FOAM CHAMBER A)

Flow Rate：8L/S（125 GPM）

Working Pressure: 3.5-6.5bar

Foam expansion ratio: 5:1（MIN）

25% Liquid precipitation time: 2.1 MIN

It is made of housing, foaming nozzle tube, guide board.

Principle: When the mixture go through the foaming nozzle tube, the fog flow will be developed. Then negative pressure occurs which will intake a lot of air to develop air foam. The foaming nozzle tube and guide board lead to tank which help the air foam cover on the fire area to extinguish a fire.

PHF4-24

Type : PHF4-24 (Foam Eductor)

Material （body）: hard anodized aluminum

Swivel Inlet：1.5’’, 2.5’’, 3’’

Coupling: Storz/NH/BSP/Russian type, etc.

Flow Type: 240LPM, 360LPM, 480LPM, 960LPM,1440LPM

Mixture Ratio: 0.5％-1％-3％-6％ adjustable.

Working Pressure: 6-14bar (87-200 PSI)

Flush function available to clean the nozzle.

Lightweight hardcoat anodized aluminum material for resistance to corrosion and wear.

Full-time swivel rocker lug inlet coupling and rigid male outlet is standard.

SX-MF-N

Type : SX-MF-N ( Middle Foam Nozzle)

Material （body）: Aluminum

Material （Foam attachment）: Stainless Steel

Inlet：1.5"  or 2’’

Flow Rate: 480LPM

Working Pressure: 6 bar

Reach @ Flow: 12 m

Foam expansion ratio: 70:1

50% Liquid precipitation time: >5 MIN

Valve Type： Aluminum valve

SX-SE-N

Type : SX-SE-N (Self-Eduction Nozzle )

Material （body）: Painted aluminum

Material （handle）: Painted aluminum

Material ( foam attachment ) : Plastic ABS

Material (self suction tube): Rubber

Swivel Inlet：2.5" ( 65mm ) recommended

Coupling: Storz/NH/BSP/Russian type, etc.

Flow Rate: 240LPM or 480LPM

Working Pressure: 6 bar

Reach @ Flow: 35 m

Self suction tube is available

SX-SE-X

Type : SX-SE-X (Self-Eduction Nozzle )

Material （body）: hard anodized aluminum

Material （handle）: Horseshoe (Injection Molded Nylon red Handle)

Material ( Nozzle ) : Stainless steel or aluminum

Swivel Inlet：2.5" ( 65mm ) recommended

Coupling: Storz/NH/BSP/Russian type, etc.

Valve Type： ABS ball valve, aluminum valve is available

Flow Rate: 480LPM or 960LPM

Working Pressure: 6 bar

Reach @ Flow: 40 m

Self suction tube is available